Mission File Options

From Project Apollo - NASSP
Revision as of 17:51, 24 June 2026 by Indy91 (talk | contribs) (More parameters)
Jump to navigation Jump to search

NASSP uses a mission file to specify vehicle configuration and mission parameters.

Option Function Default Value
SMJCVersion Service Module Jettison Controller version. A modification was used on Apollo 13 and later to prevent the Service Module from skipping out of the atmosphere on reentry. Valid values are:

1 Block I and pre Apollo 13
2 Apollo 13 and later

1
JMission If set to TRUE, the CSM will have the panels and systems that were flown on the J-type Apollo missions FALSE
Panel277Version Version of CSM panel 277. Valid values are:

0 No panel
1 J-type mission panel
2 Skylab missions panel

0
Panel278Version Version of CSM panel 278. Valid values are:

1 Pre Apollo 15
2 Apollo 15-16
3 Apollo 17
4 Skylab
5 ASTP

1
LMDSKYVersion Version of the LM DSKY. Valid values are:

1 Same as CM DSKY (Apollo 10 and before)
2 ALT and VEL lights (Apollo 11-14)
3 PRIO DISP and NO DAP lights (Apollo 15-17)

2
HasLMProgramer If set to TRUE the Lunar Module Programer for automatic flight and remote control is used (Apollo 5 only) FALSE
HasAEA If set to TRUE the Lunar Module has an Abort Electronics Assembly (computer of the AGS). Only Apollo 5 did not fly one. TRUE
LMHasAscEngArmAssy If set to TRUE the Ascent Engine Arming Assembly is used to remotely fire the APS engine in an unmanned configuration (flown on Apollo 9 and 10). FALSE
LMHasLegs If set to TRUE then the LM has legs. TRUE
LMHasDeflectors If set to TRUE then the LM has RCS plume deflectors. TRUE
LMHasCask If set to TRUE then the LM has a RTG Cask. TRUE
CSMHasHGA If set to TRUE then the CSM has an S-Band High Gain Antenna. TRUE
CSMHasVHFRanging If set to TRUE then the CSM has the VHF Ranging System. TRUE
CMCVersion Name of the CMC software. Artemis072
TEPHEM0 If Skylark or a custom CMC rope is used for the mission, this value is used to initialize the CMC clock on initial startup. It is the MJD at midnight July 1st preceeding the launch. 41133.0
LGCVersion Name of the LGC software. Luminary210
AEAVersion Name of the AEA software. FP8
InvertLMStageBit Input bit to the LGC software for the current stage (descent stage attached or not) is inverted. This was the case on Apollo 5 (LM-1) FALSE
ATCA_PRM_Factor A factor used in the LM ATCA to control the linearity of the ACA inputs for rotational control by the astronauts. Apollo 9 used 0.1 which was determined to be too sensitive, so that it got changed to 0.3 afterwards 0.3
LM_CGX_Coefficients Polynomial coefficients for the LM ascent stage center-of-gravity X-component as a function of total mass. 8.7719e-08, -7.9329e-04, 7.9773e+00
LM_CGY_Coefficients Polynomial coefficients for the LM ascent stage center-of-gravity Y-component as a function of total mass. 2.1488e-10, -2.5485e-06, 1.2769e-02
LM_CGZ_Coefficients Polynomial coefficients for the LM ascent stage center-of-gravity Z-component as a function of total mass. 6.1788e-09, -6.9019e-05, 2.5186e-01
CMtoLMPowerConnectionVersion CM to LM power connection version. 0 = connection doesn't work with LM staged, 1 = LM has a CB to bypass circuit to descent stage, 2 = circuit bypassed automatically at staging. 0
EmptySMCG Center-of-gravity of the empty SM (but including SM RCS) in inches 914.5916, -6.6712, 12.2940
HasRateAidedOptics FALSE = Optics mode switch is not bypassed for CMC to optics commands, TRUE = optics mode switch is bypassed for CMC to optics commands (ECP 792) FALSE
CrossPointerReversePolarity FALSE = Normal polarity (Apollo 14 and earlier), TRUE = Lateral axis for PGNS and LR input has switched polarity (Apollo 15 and later) FALSE
CrossPointerShades FALSE = No shades (Apollo 15 and earlier), TRUE = Shades (Apollo 16 & 17) FALSE
LMNumber Get LM number for mission specific EPS, ECS and CWEA versions. In the future this will also decide which systems config file will be loaded 5
LMEventTimerReverseAtZero FALSE= LM event timer continues to count down through zero, TRUE = when reaching zero it starts counting up (Apollo 13 and later) FALSE
Apollo13Failures Run special Apollo 13 failure and audio code FALSE
CDRVesselName Name of CDR, used for EVA vessel CDR
CMPVesselName Name of CMP, used for EVA vessel CMP
LMPVesselName Name of LMP, used for EVA vessel LMP
CDRSuitName Name of CDR to print on suit CDR
CMPSuitName Name of CMP to print on suit CMP
LMPSuitName Name of LMP to print on suit LMP

TBD

Retrieved from "http://nassp.space/index.php?title=Mission_File_Options&oldid=2397"