Service Propulsion System: Difference between revisions

From Project Apollo - NASSP
Jump to navigation Jump to search
imported>Tschachim
(...)
imported>Tschachim
Line 9: Line 9:
[[Image:SPS_switch_location_1.jpg|framed|right|Location of SPS displays & controls on Panel 3, upper part]]
[[Image:SPS_switch_location_1.jpg|framed|right|Location of SPS displays & controls on Panel 3, upper part]]


In ''[[First Steps#Standard mode|Standard mode]]'' and ''[[First Steps#Virtual AGC mode|Virtual AGC mode]]'' the SPS engine works like the real thing, that means as specified in the original documentation<cite>AOH</cite>. So the real SPS engine isn't throttleable, it only can be turned on or off by opening or closing one of the two pairs of engine injector valves (bipropellant valve systems A or B) {{Panel label|name=D}} pneumatically. The gaseous nitrogen pressure of valve system A and B {{Panel label|name=B}} can be monitored by switching the SPS-PRESS IND switch {{Panel label|name=M}} to N<sub>2</sub> A or N<sub>2</sub> B.
In ''[[First Steps#Standard mode|Standard mode]]'' and ''[[First Steps#Virtual AGC mode|Virtual AGC mode]]'' the SPS engine works like the real thing, that means as specified in the original documentation<cite>AOH</cite>. So the real SPS engine isn't throttleable, it only can be turned on or off by opening or closing one or both of the two pairs of engine injector valves (bipropellant valve systems A or B) {{Panel label|name=D}} pneumatically. The gaseous nitrogen pressure of valve system A and B {{Panel label|name=B}} can be monitored by switching the SPS-PRESS IND switch {{Panel label|name=M}} to N<sub>2</sub> A or N<sub>2</sub> B.


In order to fire the SPS engine, the &Delta;V THRUST A and/or &Delta;V THRUST B switches {{Panel label|name=?}} are  unguarded and switched to NORMAL ("single/double bank operation") to arm the control logic for engine injector valve system A or B. Now there are 3 ways or thrust modes to fire the engine:
In order to fire the SPS engine, the &Delta;V THRUST A and/or &Delta;V THRUST B switches {{Panel label|name=?}} are  unguarded and switched to NORMAL ("single/double bank operation") to arm the control logic for engine injector valve system A or B. Now there are 3 ways or thrust modes to fire the engine:

Revision as of 00:05, 16 November 2006

The Service Propulsion System (SPS) is the Command/Service Module main engine and provides the impulse for all velocity changes (ΔVs) throughout a mission and the SPS abort capability after the launch escape tower is jettisoned. The engine uses Aerozine 50 (hydrazine/UDMH) fuel and nitrogen tetroxide oxidizer and has a maximum thrust of 20,500 lbf (91.2 kN). This hypergolic fuel combination is pressurized with helium during thrusting periods, so no propellant pump is needed. The propellant flow from the tanks to the thrust chamber is controlled by the engine injector valves, which are pneumatically controlled with nitrogen. The engine is gimbaled to allow thrust vector control during a burn.

Quickstart mode

In Quickstart mode the SPS engine works like a normal Orbiter main thruster. The engine can be throttled with the keyboard or Orbiter's joystick control as usual, although the real SPS engine isn't throttleable. The Interplanetary MFD (IMFD) autoburn program can be used, too. It's not necessary to use the panel displays and controls, the Orbiter engine displays can be used though the panel displays are enabled normally.

Engine thrust on/off logic

Location of SPS displays & controls on Panel 3, upper part

In Standard mode and Virtual AGC mode the SPS engine works like the real thing, that means as specified in the original documentationAOH. So the real SPS engine isn't throttleable, it only can be turned on or off by opening or closing one or both of the two pairs of engine injector valves (bipropellant valve systems A or B) D pneumatically. The gaseous nitrogen pressure of valve system A and B B can be monitored by switching the SPS-PRESS IND switch M to N2 A or N2 B.

In order to fire the SPS engine, the ΔV THRUST A and/or ΔV THRUST B switches ? are unguarded and switched to NORMAL ("single/double bank operation") to arm the control logic for engine injector valve system A or B. Now there are 3 ways or thrust modes to fire the engine:

SPS thrust direct on mode

CMC ΔV mode

SCS ΔV mode

Thrust vector control

Propellant pressurisation

Propellant utilization

Location of SPS displays & controls on Panel 3, lower part


Thermal control

<biblio force=false>

#References
</biblio>

External Links